Titanium is a chemical element known for its resistance to corrosion, low density and strength. Over the years, joining together pieces of titanium has been a puzzle, but all the solutions implemented to resolve the problem, titanium weld proved to be the best. But the idea of welding titanium implies a certain level of complexity that would be more likely to be not understood by ordinary consumers. This should not be a problem though since the world is abundant in skilled welders is expected to take care of the technical aspects of the process. Nevertheless, knowledge about the basics of welding titanium will prove quite helpful to a layperson, especially in the case of titanium preparation before the actual welding process. According to experts, the key to success is in the preparation of titanium weld materials. They even claim that 70% of it requires preparation, while only 30% account for the actual process.
Cleaning materials plays a very important part in ensuring the success of the welding process. Chemical cleaning should be done. All air contaminants, oxide, oil, grease, and dirt must be removed from the material. Even natural oils derived from one's skin should be removed. In this case, similar to titanium aluminum welding. In the second type of weld, cleanliness is also key. Another aspect of the preparation of titanium is the air that surrounds the welding titanium. During the welding process of titanium, the heat spreads throughout the surrounding area known as the Heat Affected Zone (HAZ) must be prevented from getting in contact with oxygen in the air. Therefore, in addition to the use of pure argon, where weld is limited to be of help.
In actual practice, especially in the production, which is controlled vacuum chamber is used as a place for welding titanium. Since there is no oxygen in a vacuum, the risk of reaction is not likely to happen. Given the above information will certainly ensure a high quality weld. It should be noted that although the weld of titanium is quite expensive, so even a welder himself should think twice in the process, especially if he has no experience in the weld of these elements. It is recommended for those very experienced in the field as well as those who underwent formal studies on the matter. In this case, also good for the consumer advice to hire only the services of skilled titanium welder.
Cleaning materials plays a very important part in ensuring the success of the welding process. Chemical cleaning should be done. All air contaminants, oxide, oil, grease, and dirt must be removed from the material. Even natural oils derived from one's skin should be removed. In this case, similar to titanium aluminum welding. In the second type of weld, cleanliness is also key. Another aspect of the preparation of titanium is the air that surrounds the welding titanium. During the welding process of titanium, the heat spreads throughout the surrounding area known as the Heat Affected Zone (HAZ) must be prevented from getting in contact with oxygen in the air. Therefore, in addition to the use of pure argon, where weld is limited to be of help.
In actual practice, especially in the production, which is controlled vacuum chamber is used as a place for welding titanium. Since there is no oxygen in a vacuum, the risk of reaction is not likely to happen. Given the above information will certainly ensure a high quality weld. It should be noted that although the weld of titanium is quite expensive, so even a welder himself should think twice in the process, especially if he has no experience in the weld of these elements. It is recommended for those very experienced in the field as well as those who underwent formal studies on the matter. In this case, also good for the consumer advice to hire only the services of skilled titanium welder.
Tidak ada komentar:
Posting Komentar